Flame Resistant Conveyor Belt

Product Features:

For mining, wood, paper & pulp, sugar & food, recycling and chemical & fertilizer plants.In some environments where coal dust, gas, fertilizer or other combustible materials are involved,it is essential that the conveyor belts being used cannot create static electricity that can ignite gases and dust in the atmosphere.

Technical indexes:

 

DESIGNATION Standards Tensile Strength(Mpa) Elongation at Break(%) Abrasion Loss(mm3) Required properties Brief description of test
Valid for all flame-resistant belts ISO 284 / / / Anti-static electrical conductivity Measurement of electrical conductivity between electrodes. The resistance must be less than 3×108 ohms.
NF EN 20284
DIN EN 20284
PN EN 20284
K ISO 340 L – 15D – 17H – 20 L – 350D – 400H – 400 L – 200D – 175H – 150 Flame resistant with cover Covers intact.Aggregate duration of flame for six tests shall be less than 45s and no individual value shall be greater than 15s.
NF EN 20340
DIN 22103
DIN EN 20340
S ISO 340 L – 15D – 17H – 20 L – 350D – 400H – 400 L – 200D – 175H – 150 Flame resistant with and without cover Covers intact and covers removed.Aggregate duration of flame for six tests shall be less than 45s and no individual value shall be greater than 15s.
NF EN 20340
DIN 22103
DIN EN 20340
C1 EN 14973 15 350 200 Flame resistant for underground Max. drum temp.: 325℃;
Covers intact:
Average afterflame and afterglow times for six test pieces shall be no more than 3 s and no individual result shall be greater than 10 s;
Covers removed:
Average afterflame and afterglow times for six test pieces shall be no more than 5 s and no individual result shall be more than 15 s;
Fire propagation: either
a) the length of the test piece that remains undamaged shall be not less than 600 mm across the whole width of the conveyor belt;
or
b) the maximum average temperature rise shall not exceed 140 °C, the length of belting consumed by mass shall not exceed 1 250 mm and the length of the test piece that remains undamaged shall be not less than 50 mm across the whole width of the conveyor belt.
EN 1544 B2
ISO 340
EN 12881-1